CA Type Standard-Flow Quick Coupler
(General-Purpose in lower Pressure, single shut-off valve quick coupler)
|
|
|
 FEATURES
- When plug insert into socket, the valve of socket opened; when plug be removed, the valve of socket closed, it is not requirement controlling valve when connecting.
- Female thread, male thread and hose nipple construction suit various ways of connecting.
- Material: Brass, stainless steel and soft steel.
|
|
|
DIRECTIONS |
- Releasing
- When sleeve pulled, s/s ball roll out automatically, plug rebound away by valve spring, hence valve closed automatically for stopping fluid flow.
|
 |
- Fitting
- When plug inserted into socket, valve opened causes fluid flow, sleeve pushed back to original location by sleeve spring causes steel ball locked valve keeping absolutely connecting. Stop ring prevents leaking completely.
|
 |
|
NOTICES
- It is a single valve design so that direction of flowing must be from socket to plug.
- When connect with vibration tools or machines, connecting with an approximate 30cm long hose between coupler and tool/machine.
|
|
SPECIFICATION:
|
Model |
CA-10 |
CA-20 |
CA-30 |
CA-40 |
CA-400 |
CA-600 |
CA-800 |
|
Nominal Diameter |
1/8" |
1/4" |
3/8" |
1/2" |
1/2" |
3/4" |
1" |
|
Material of Socket/Plug Body |
Steel SC*/Brass C3604 [BsBM]/Stainless Steel SUS |
|
Connection Method |
Socket |
Female screw[F]/Male screw[M]/Hose nipple[H] |
|
Plug |
|
Working Pressure kgf/cm2
[Max. working pressure] |
Steel |
15(20) |
|
Brass |
10(15) |
|
Stainless Steel |
15(20) |
|
Valve Packing material : Working Temperature Range |
Standard |
Nitrile rubber[NBR] : -20oC ~ +80oC |
|
Optional |
VITON(FPT) : -20oC ~ +180oC EPDM : -40oC ~ +150oC |
|
Applicable Fluid |
Steel |
Air/Oil |
|
Brass |
Air/Water |
|
Stainless Steel |
Air/Water |
|
USE |
Pneumatic Tool, Pneumatic Piping, Pneumatic Mmachinery, Water Piping....etc. |
☞ Chrome-plated
|
|